Profish Boats can be driven quite easily because they don't have the depth of the vee in the hull bottoms that you'll find in the more sophisticated fibreglass boats. As a result, they plane at a much lower speed and are designed to cruise off shore in the 18-22 knot zone. Unlike there more deeply veed fibreglass counterparts, these big rigs will easily cope with the extra weight of the heavier 4-stroke outboard technology. In fact, they benefit from the additional weight, almost the exact opposite to the situation you will find in most deep vee fibreglass boats of a similar length. The specifications on this page are for the 6.0 meter Centre Console and can be used as a guide for you in designing your boat. For more accurate specifications for your particular style of boat you can contact Peter in one of three ways. One phone Peter on Mob: 0417782114, contact Peter via e-mail profishboats@bigpond.com or call in at Lees Crossing Road Dayboro 4521 Queensland you will be pleased you did.

Manufacturer	Profish Alloy Boats
Model	6.0 M
Type	Centre Console
Construction	Plate Aluminium
Topside Thickness	3.0mm
Bottom Thickness	5.0mm
Length on trailer in garage	8.0mm Approximately
Length on trailer to duckboard	6.65m
Length stern head to transom	6.0m
Maximum Beam	2.5m
Dead Rise	16 Degrees
Hull Draught	300mm Approximately
Hull (only) dry weight	716kg
BMT Weight for Highway	1.6 Tonne
Minimum Horsepower	115HP
Maximum Horsepower	175HP
Stern Drive Option	On Request
Fuel Capacity	200Ltrs
Water Capacity	100Ltrs
Capacity Number of Persons	8